Items starting with T

Tempered Glass Washing Machine

Tempered Glass Washing Machine

Feature:
PLC control system with touch screen operation interface
Applying stainless steel frame and water-proof bearing in the drying section
Perfect washing performance for on/off line coating glass or Low-E glass*
Adopt intermittent working design for saving energy
Inverter driving for Low-E brush turning speed*
Automatic water compensation function for water tank*

Thermal Edge Spacer

Thermal Edge Spacer

Compound Sealing Spacer for Insulating Glass

A new type of  compound sealing spacer for IG 

Compared with traditional strip, the new strip has the following advantages: 
1. Increasing holding power among the glass. 
2. Moisture absorption properties. 
3. Tensile strength 
4. Vacuum foil membrane packing with display card 
5. Two usages 
1)You can use the Insulating Glass spacers separately 
2)You can spread single-component hot melt burly or Polysulfide adhesive on the outside of the Insulating Glass spacer, to enhance its structure. 
6. Unique manufacture method makes good endurance ability in weathers or humidity. 
7. Saving more energies, traditional  sealing spacer 150g a meter on average, and new Compound Sealing Spacer 90g a meter on average, the amount needed all the nation is 100,000,000 meters each year, and the petroleum can be saved 60,000 tons a year. 
8.New package has higher volume rate. 

Thermal Glass Bending Furnace

Thermal Glass Bending Furnace

Intermittent Thermal Glass Bending Furnace,Thermal Glass Bending Furnace,Glass Bending Furnace,Automotive windshield Thermal Bending Furnace,Automotive windshield Glass Thermal Bending Furnace
  RB2 is a professional facility for glass thermal bending process, it can conduct all types of sizes of glass bending process. It is widely used at automobile, architecture, bullet-proof glass industries etc.
  This furnace contains heating part, cooling part and electric control part. In the middle section there is one heating room, two cooling rooms and there are two rails under the furnace. On the top of the rails, there are two movable glass wagons.

Thermal Spacer

Thermal Spacer

Compound Sealing Spacer for Insulating Glass

A new type of  compound sealing spacer for IG 

Compared with traditional strip, the new strip has the following advantages: 
1. Increasing holding power among the glass. 
2. Moisture absorption properties. 
3. Tensile strength 
4. Vacuum foil membrane packing with display card 
5. Two usages 
1)You can use the Insulating Glass spacers separately 
2)You can spread single-component hot melt burly or Polysulfide adhesive on the outside of the Insulating Glass spacer, to enhance its structure. 
6. Unique manufacture method makes good endurance ability in weathers or humidity. 
7. Saving more energies, traditional  sealing spacer 150g a meter on average, and new Compound Sealing Spacer 90g a meter on average, the amount needed all the nation is 100,000,000 meters each year, and the petroleum can be saved 60,000 tons a year. 
8.New package has higher volume rate. 

Thermal Spacer Strip

Thermal Spacer Strip

Compound Sealing Spacer for Insulating Glass

A new type of  compound sealing spacer for IG 

Compared with traditional strip, the new strip has the following advantages: 
1. Increasing holding power among the glass. 
2. Moisture absorption properties. 
3. Tensile strength 
4. Vacuum foil membrane packing with display card 
5. Two usages 
1)You can use the Insulating Glass spacers separately 
2)You can spread single-component hot melt burly or Polysulfide adhesive on the outside of the Insulating Glass spacer, to enhance its structure. 
6. Unique manufacture method makes good endurance ability in weathers or humidity. 
7. Saving more energies, traditional  sealing spacer 150g a meter on average, and new Compound Sealing Spacer 90g a meter on average, the amount needed all the nation is 100,000,000 meters each year, and the petroleum can be saved 60,000 tons a year. 
8.New package has higher volume rate. 

Thermal Tape

Thermal Tape

Compound Sealing Spacer for Insulating Glass

A new type of  compound sealing spacer for IG 

Compared with traditional strip, the new strip has the following advantages: 
1. Increasing holding power among the glass. 
2. Moisture absorption properties. 
3. Tensile strength 
4. Vacuum foil membrane packing with display card 
5. Two usages 
1)You can use the Insulating Glass spacers separately 
2)You can spread single-component hot melt burly or Polysulfide adhesive on the outside of the Insulating Glass spacer, to enhance its structure. 
6. Unique manufacture method makes good endurance ability in weathers or humidity. 
7. Saving more energies, traditional  sealing spacer 150g a meter on average, and new Compound Sealing Spacer 90g a meter on average, the amount needed all the nation is 100,000,000 meters each year, and the petroleum can be saved 60,000 tons a year. 
8.New package has higher volume rate. 

Thermo Compressor

Thermo Compressor

Brief Introduction:

High intensity machine body

Uniform distribution far infrared quartz lamp

Easy lamp replacement device

Linear adjustable heating power

Digital display, motor driven, linkage stiff shaft adjusts the roller distance synchronously

Glass thickness superelevation alarm

Frequency control

Speed adjustable button installed in output end

Far-infrared thermoscope

Stable emergency device

Standard container load

Frequency control

Speed adjustable button installed in output end

Far-infrared thermoscope

Stable emergency device

Standard container load

Thiokol   Applicator

Thiokol Applicator

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

Thiokol  Dispenser

Thiokol Dispenser

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

Thiokol  Extruder

Thiokol Extruder

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

Thiokol  Extruder Machine

Thiokol Extruder Machine

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

Thiokol Extrudering Machine

Thiokol Extrudering Machine

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

Thiokol Extrudering Machine   for Insulating Glass

Thiokol Extrudering Machine for Insulating Glass

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

Thiokol Extrudering Machine for Double  Glazing Glass

Thiokol Extrudering Machine for Double Glazing Glass

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

Thiokol Spreading Machine

Thiokol Spreading Machine

IG-TPEM Series Two Parts Components Extruding Machine Mixes In Exact Proportion With Precision Systems


Insulated glass made of rigid spacer bars is, most of the case, double sealed. Secondary seal is the final seal. The secondary sealant could be polysulphide, silicon and polyurethane, etc. All of them consist of two parts. Part A is major component in large drum while Part B is catalyst in small drum. The mixing ratios vary according to different materials and different manufacturers.

IG-TPEM two parts components extruding machine is used to melt both Parts A and B components, pressurize and scale in precise ratio, mix them thoroughly, extrude from sealant gun and nozzle.

IG-TPEM is also applicable for curtain wall and glazing sealing.

tag

Contact Us

  • HI-TECH INDUSTRIAL ZONE,JINAN,CHINA
  • +86-531-62326877